Verdict
There’s a good argument to be made that the Pixel Buds 2a are the best value earbuds you can buy in 2026. Of course they’re not short of competition. Still, they are admirable performers in so many areas that I’d recommend them not just to the Android faithful, but to anyone looking for a great deal on true wireless earphones
-
Balanced and engaging sound
-
Impressive ANC
-
Great fit and compact size
-
Solid battery life
-
No wireless charging
-
No on-bud volume control
-
Lots of budget competition
-
Works a bit better for Android users
Key Features
-
Review Price:
£129
-
Tensor A1
These are powered by Google’s Tensor chip and bring ANC to the A-series line for the first time
-
Hands-free Gemini AI
You can get instant voice access to Google’s Gemini assistant to control playback and ask for live help without taking out your phone
-
Secure twist-to-fit design
A built-in stabiliser fin and compact size help you get a snug in-ear fit that stays comfortable and locked in place
Introduction
Google’s Pixel Buds 2a are a great upgrade over the original Pixel Buds A-Series, adding active noise cancellation, an improved audio processor (the Tensor A1 Chip), better battery life, and a revamped design for a more secure fit, plus IP54 water and dust resistance. That’s before even talking about some of the Google-specific features like spatial audio with Pixel devices and hands-free Gemini support.
In fact, Google has brought over a surprisingly long list of the features of its Pixel Buds Pro 2 to its more affordable pair. If Apple were to do something similar, its low-cost AirPods would look a lot more like a previous version of AirPods Pro than the semi-open (and slightly less compelling) buds that they are.
The Pixel Buds 2a offer ANC performance to match the first-gen Pixel Buds Pro, and they use the same 11mm dynamic drivers and the custom Google Tensor A1 chip. The difference is that these cost just £129 at the time of writing, while the Pro 2 are £219.
When they drop to around £100 or just under, they are fantastic value. I’ve had them since they were first available in October 2025, and I’ve been using them a lot in recent months to see how they compare to some of the best budget buds on the market, including the OnePlus Buds 4, EarFun Air Pro 4 Plus, and Nothing Ear (3a).
Design
- Small, lightweight and secure
- Comes in four different colours
- Responsive touch controls
These are some of the smallest and lightest buds around. They’re just 4.7g each, and the pebble-shaped case is tiny and pocketable too. A nice benefit of the case is that it has a really satisfying click when you open and close it. It’s the little things!
The buds themselves are highly comfortable and secure to wear and use. That’s thanks not only to the petite size but also to the built-in soft silicone stabiliser, which makes it so they don’t budge or fall out.

Controls here are handled with simple capacitive touch input, which has turned out to be very reliable and responsive. You tap once for play/pause, twice to skip forwards and thrice to go backwards. Hold each bud to cycle between noise-cancellation and transparency modes.
I like that these support auto-pause when you remove a bud, too, and this has always worked well in months of testing. Something is missing, though: Google has unfortunately kept its touch-swipe volume controls just for the Pro model.
Also, the included ear tips run a little small. I usually fit the standard medium size, and I found I got a much better acoustic seal by sizing up to large on Buds 2a. Unlike some rivals, it’s great to see Google offer its buds in a wide range of colours. I’m a fan of the soft lavender Iris colour I’ve tested out, but there’s also Hazel (a dark olive shade), the off-white Fog and Berry (a peony red). The earbuds also have a handy IP54 rating, keeping them protected from dust and light rain.

Noise-Cancellation
- Great ANC performance, with a good seal
- Excellent transparency mode for awareness
- Strength isn’t customisable: it’s just ANC on, off, or transparency
ANC is a new addition to the A-series line here, but it’s not just an afterthought. Google says the noise-cancellation on the 2a matches the performance of the previous-gen Pro buds, and that feels right to me after using them on trains and planes, in the gym, at home and out and about. They’re impressive, and better than many others at this price point.
The crucial thing is getting the right fit. As I said above, the tips run slightly smaller than most brands. When I used the default medium tips, I didn’t get the best ANC experience. Going up to the large tips improved things considerably. Once they’re locked in place with the stabiliser fins and you’ve got a proper seal, they cancel loads of external noise.

On a flight, with engine noise at around 82dB, I found I was able to silence almost the full sound, leaving my podcast perfectly audible at 50-60% volume. I’ve found the same to be true when using them around more unpredictable noise too, like city streets and traffic.
They’re a little slower to adapt to sudden noise changes than a flagship pair, but very adequate. I’ve found them usable in coffee shops where several distractions tend to challenge other earbuds.
Comparatively, I find them better at noise-cancelling than the Nothing Ear (3a), the EarFun Air Pro 4 Plus and the Cambridge Audio Melomania A100. After months of use, I never end up increasing the volume when using ANC, which I definitely can’t say for all rivals.
Transparency is also excellent. When you switch to awareness mode, it’s a natural sound pass-through where I’ve found I can have a conversation without taking out the buds.
Features
- Hands-free Gemini voice integration
- Google Fast Pair and multipoint
- Updates and control via Android and web app
When I first set these up, I did so on a Google Pixel 10 Pro, but I’ve also used them just as much in connection with various different iPhones, a MacBook Air and my iPad. So, when I say they work best with Android but are perfectly usable on a range of devices, I mean it.
Pairing is intuitive, thanks to the button on the case, and while there’s no iOS app, there is a web app, making it easy to access customisation and firmware updates from your desktop. Far more earbuds and headphones should have a web app – it makes a lot of sense. You just need to go to mypixelbuds.google.com on a compatible browser, where you can change settings like the equaliser, multipoint, in-ear detection and more.
There’s a lot that Google added to its A-series refresh, given that the predecessor buds launched in 2021. It’s not only ANC and transparency that are new here, but spatial audio support, an in-app equaliser, Bluetooth multipoint, Google Find Hub support, hands-free Gemini, more battery life, better durability, and a replaceable case battery, too.
Changing settings is straightforward on Android phones, but there is unfortunately no iOS app. I’ve got around this by using the web app, but it is a little frustrating. In an ideal world, Google would make an iOS app for Pixel Buds, and Apple would make an Android one for AirPods. Alas, that’s not our world.
I have found the support for Bluetooth multipoint reliable, and I’ve never had an issue with the in-ear detection, either. Built-in spatial audio is nice to have, but only works on Pixel phones, so it may not end up being relevant for all of us. Similarly, hands-free Gemini works well, but isn’t a feature I’d see myself using, especially as I use these a lot with my iPhone.

Overall, though, the Pixel Buds 2a have a comprehensive feature set, and they should be well-supported with firmware upgrades, as Google tends to add new features over time via its Pixel Drop releases.
They are missing a few benefits in comparison with the Pros, though, as they don’t have adaptive audio, loud noise protection, head gestures (to answer or decline calls by shaking or nodding) or conversation detection (automatic transparency mode when speaking).
Battery Life
- 7 hours of playback with ANC on
- User-replaceable battery inside the charging case
- Overall case battery is lower than some rivals
Google claims up to 7 hours of playback on a single charge with Active Noise Cancellation enabled, extending to 10 hours with ANC turned off. Once you factor in the charging case, that means you’re looking at a maximum total listening time of 20 hours with ANC or 27 hours without. The case capacity may be a bit lower than some competitors, but the single-charge battery life from the earbuds themselves is pretty strong.
To put Google’s claims to the test, I ran a three-hour battery drain test with ANC active, streaming a Deezer playlist at 50% volume from an iPhone (using the AAC codec) while keeping Bluetooth multipoint connected to two devices simultaneously.

Checking levels via the Pixel Buds web app at the end of the session, the left earbud dropped to 78% while the right sat at 81%. That average depletion of around 20% over three hours suggests the Pixel Buds 2a should comfortably meet (and likely exceed) Google’s 7-hour estimate in normal listening conditions.
These buds don’t have any wireless charging from the case, but they do have a distinct repairability feature: the case has a user-replaceable battery. The batteries on the buds are sealed in, like most on the market; but if you needed to, you could switch out the case battery with just a screwdriver and a £32.99 battery from iFixit.
Sound Quality
- 11mm dynamic drivers
- Controlled and balanced sound
- 5-band EQ in the app
The Pixel Buds 2a offer an excellent default listening experience for the price and when compared to their competition.
They have a little bit of extra bass emphasis, but nothing like the outrageously boosted low-end of most rivals, like the CMF Buds Pro 2 or OnePlus Buds 4. I also found the Nothing Ear (3a) boomy without tweaks. Thankfully, I can say you won’t need to fuss with the equaliser on these if you don’t want to. The Buds 2a deliver a balanced, crisp and clear sound that works well for all the music genres and podcasts I’ve listened to over several months of testing.

I found I could still discern nuance in the thump of Massive Attack’s Angel, which isn’t always the case on budget buds. The 11mm drivers conveyed the energy and intricacy of the mix in sombr’s Homewrecker and The Goo Goo Dolls’ Iris.
At this price I find these hard to fault, as long as you’ve got a good fit and seal. If you push the volume too high, you can introduce a little high-frequency harshness, but I really don’t listen loud enough to notice it. And there is a five-band EQ available, so you shouldn’t have too much trouble getting them to sound just how you like. Nothing does offer more detailed customisation on the Ear (3a), though, if that matters to you.
Should you buy it?
You want great all-around earbuds at an affordable
The Pixel Buds 2a definitely punch well above their weight, delivering effective active noise cancellation, pleasing sound, and a comfortable fit at an affordable price. There’s a lot of competition, but these are great performers in several areas. Add in strong single-charge playtime, a web app, and a few Android-specific features, and they offer a lot to compete with the best budget buds.
You need on-bud volume control, high-res codecs or an iOS app
While the web app support is great, non-Android users miss out on some customisation due to the lack of an iOS app, and spatial audio is only for Pixel users. Audiophiles may feel limited by basic SBC and AAC Bluetooth codecs, and you’ll need to be fine with using your phone to adjust the volume, as the touch controls lack swipe gestures for volume.
Final Thoughts
While the Google Pixel Buds 2a aren’t the flashiest earbuds at the price, they’re among the most consistently impressive pairs I’ve tried. They offer strong ANC, sound, fit, and battery. A good performance across not just a few, but all of these categories, is surprisingly rare in the world of budget buds. At £129, you still may be able to find better options for the money, but when these are on offer, they’re some of the best buys around.
I’ve tested them for several months, not just a few weeks. And I’ve found they’ve become one of my more trusted pairs in that time. I can reliably say they hold up under long-term use. Rivals like the Nothing Ear (3a) and OnePlus Buds 4 are worth considering, of course. But there are areas where Google beats them, especially when it comes to the secure fit and a less boomy default sound signature.
The web app is a great workaround, but it is a shame there’s no iOS app, and that a few features are reserved for Android users or even Pixel-only. Even so, though, the Pixel Buds 2a are a great true wireless pair for those of us after a reliable pair of buds for everyday listening. The cons are minor, and when they’re on sale for under £100, they’re worth it.
How We Test
The Google Pixel Buds 2a were tested over the course of eight months of use, with real-world testing including flights, commutes on the London Underground, use at the gym, home, in offices, coffee shops and outdoor walks. They were used with a Google Pixel 10 Pro, iPhone 16e, iPhone 17 Pro, MacBook Air, and iPad Air. They were used alongside several other budget earbuds for comparison, trialled side-by-side with the Pixel Buds Pro 2, and battery drain testing was done.
- Tested for eight months
- Tested with real-world use
- Battery drain carried out
FAQs
No. To keep costs down on the A-series, the Pixel Buds 2a case charges strictly via USB-C. Wireless Qi charging is available on Google’s flagship Pixel Buds Pro series.
No. The Pixel Buds 2a use standard SBC and AAC codecs.
Full Specs
| Google Pixel Buds 2a Review | |
|---|---|
| Manufacturer | |
| IP rating | IP54 |
| Battery Hours | 20 |
| Fast Charging | Yes |
| Release Date | 2025 |
| Audio Resolution | SBC, AAC |
| Noise Cancellation? | Yes |
| Connectivity | Bluetooth 5.4 |
| Colours | Berry, Fog, Hazel, Iris |
| Frequency Range | – Hz |
| Headphone Type | True Wireless |
| UK RRP | £129 |
| USA RRP | $129 |
| EU RRP | €149 |

















