Verdict
In almost every respect, the Cubitt 5 is a fully competitive system and a splendid first effort from Fyne Audio – those who value sonic insight and authority, as well as vaguely interesting aesthetic, will find plenty to enjoy. As long as they can get beyond the high-frequency unruliness and some strange hissing, that is…
-
Balanced, quite expansive sound
-
Good selection of input options
-
Tidy design, good standard of finish
-
Audibly hissy when not playing
-
No on-speaker controls, no indication of input selected or volume level
-
Nasty remote control
Key Features
Introduction
Until now it’s been busy establishing itself as a force in the world of passive loudspeakers, but now Fyne Audio is ready to enter into the most cut-throat market of the lot: reasonably affordable wireless stereo speaker systems.
Has it hit the ground running with the Cubitt 5, or is there still some distance left to go?
Design
- Choice of five finishes
- No grilles supplied
At 260 x 165 x 215mm (HWD) it’s probably just fractionally large to be a viable desktop system, but the Cubitt 5 is nevertheless a handily compact and fairly discreet pair of speakers that look the part whether on speaker stands or an appropriately deep shelf.
And once they’re there, these speakers impress with the quality of both their construction and their finish. The curved cabinet corners add a little visual interest, the build quality is not to be argued with – and each of the five available finishes is flawlessly applied and even slightly tactile.
My review sample is in Olive Green, but you might prefer Arctic White, Midnight Black, Pearl Titanium or Pebble Grey. No grilles are supplied, and that seems fair enough – would you really want to hide the drama of that driver array or the brightwork that surrounds it?
Although this is an active system, only the primary speaker requires mains power. Fyne Audio supplies a generous length of four-core cable to connect the speakers – the primary sends power as well as data along it. And unless you’re hooking up some sources to the primary speaker’s inputs, this cable and a figure-of-eight mains lead is all that’s required to get the system up and running.

Controlling it is easy enough, too – but it’s also the first way in which the Cubitt 5 underwhelms. No one’s expecting a control app in a system that doesn’t feature Wi-Fi, of course – but if you’re anticipating some physical controls on the primary or secondary speaker you’re out of luck.
The only way to control the Fyne Audio system is by using the supplied remote control handset – and it seems unlikely in the extreme that the company was able to source a cheaper-looking, cheaper-feeling handset than this one. It’s down-market in a way the speakers themselves simply aren’t – and when you factor in the lack of indication of selected input or specified volume level, it follows that the experience of controlling the Cubitt 5 isn’t all it might be.
Features
- Bluetooth 5.0 with aptX HD compatibility
- Four physical inputs
- 240 watts of Class D power
The primary is where most of the action is, of course – and here that means taking care of all physical and wireless inputs as well as being a home to the entire system’s amplification and digital-to-analogue conversion.
The Cubitt 5 uses Bluetooth 5.0 for wireless connectivity, and it’s compatible with SBC, AAC and aptX HD codecs. Physical inputs consist of an HDMI ARC socket, a digital optical input, a line-level analogue input on RCA sockets and a moving magnet phono stage also accessed via RCA inputs – Fyne Audio suggests high-output moving coil cartridge-equipped turntables will also be OK through this input. All incoming digital information is dealt with by a DAC chipset running at a native 24-bit/96kHz resolution.

Sound is served by the latest version of Fyne Audio’s IsoFlare driver arrangement – in this instance it sees a 19mm titanium dome tweeter positioned in the acoustic centre of a 127mm multi-fibre mid/bass driver.
The idea of this arrangement is to offer a singular point-source of sound throughout the frequency range, along with superior sound dispersion and driver integration – and the fluted surround is intended to deal with unwanted energy generated by the movement of the mid/bass driver.
Each of the four drivers is powered by 60 watts of Class D amplification – along with the contributions from the front-facing bass reflex slot, the company reckons this arrangement is good for a frequency response of 43Hz – 34kHz.

Sound Quality
- Controlled, balanced and detail-heavy sound
- Good low-end substance and control
- Zingy treble response
There’s plenty to like about the way the Cubitt 5 performs, but it almost goes without saying that they’re not perfect. Their shortcomings are hardly numerous, though, and not exclusively concerned with the way the system sounds – so I’ll get them out of the way first before I pile into all the enjoyable stuff.
The Fyne Audio system can get a little carried away at the top of the frequency range. A vinyl copy of John Coltrane’s timeless Blue Train serves as a great example – the Cubitt 5 undergoes a slight change of tonal character at the top end, and hits treble sounds absolutely as hard as is acceptable. It never tips over into hard or unyielding, somehow – but there’s a hint of aggression and splashiness that puts the highest frequencies at odds with everything that’s going on beneath them.

It’s not ideal, but it’s hardly unheard-of. What is unusual, though, is the mild-but-definite hissing that comes from each speaker when the system is powered up but not playing music. It ceases to be an issue when music is playing, and it’s barely audible from more than three or four metres away – but that’s hardly the point.
In my experience, no other wireless speaker system behaves in this manner – and if you’ve decided on desktop use for your new system, this trait is going to make the Cubitt 5 difficult to consider with any seriousness.
In every other department, though, the Fyne Audio has plenty going for it. Beneath the highest frequencies there’s fine consistency of tone: neutral, natural and more than willing to let the colour of the recording (or the source player) dictate terms. And despite the attention the high end draws to itself, frequency response is actually even and smoothly realised.

Low frequencies are robust, loaded with detail regarding texture and timbre, and controlled so carefully at the onset that the loping rhythm of Cool Hand by Derya Yildrim & Grup Şimşek rolls along with absolute confidence. The same 16-bit/44.1kHz FLAC file reveals a great facility with midrange resolution – just as elsewhere in the frequency range, there’s a lot of detail available, so voices are delivered with all their character and attitude intact.
This very agreeable degree of insight is carried over to the way the system creates and organises a soundstage. The presentation is expansive, coherently laid out and simple to follow – and despite each element of a recording being at arm’s length from every other element, there’s unity and singularity to the presentation at the same time.
Dynamic headroom is more than adequate, so shifts in volume or intensity are identified and relayed no matter if they’re mild or extreme. And the insight the Fyne Audio demonstrates at every turn means that the more subtle, but no less important, dynamics of harmonic variation are reported on too.
The Cubitt 5 manages to maintain its overall attitude no matter which of its inputs is in use, and no matter the amount of volume you’ve dialled in. Even that over-confident, fractionally flimsy treble maintains its stance even when you’re really pressing on where volume is concerned.

Should you buy it?
Compact size, nifty sound
A compact, well-made and great-sounding little wireless speaker system, in a wide choice of finishes, sounds just the ticket. Where it really matters, the Cubitt 5 makes a very strong case for itself.
Usability could be better
You place any sort of significance on the experience of operating an audio system. Even though the Cubitt 5 isn’t all that expensive, the method of controlling it makes it seem a lot less pricey than it is.
Final Thoughts
I can’t remember the last time I was hissed at by something that wasn’t an audience of people – but the noise coming from the Cubitt 5 before it starts to make an intentional sound is every bit as unwelcome and disconcerting.
I’ve listened to wireless stereo speaker systems costing less than £200 and more than £5K – not one of them has made the fact that it’s powered on anything like as obvious as this Fyne Audio system does.
How We Test
Positioned on a pair of Soundstyle S2 speaker stands, connected using the supplied umbilical and with the primary speaker plugged into the mains, the Cubitt 5 is tested using a FiiO M15S digital audio player as an aptX HD Bluetooth source, a Technics SL-1300G with Goldring 1022 cartridge as a turntable via the phono stage, a Rega Apollo CD player via the optical input and a Philips OLED806 using the HDMI input.
This way a lot of different content, stored in a lot of different file types, and of many different resolutions, is accessible. Testing goes on for the best part of a working week.
FAQs
Yes, if you have appropriate brackets – the bass reflex slot faces forwards, which is helpful in this regard.
There is not. There aren’t any physical controls on the speakers, either.
The Fyne Audio are not supplied with grilles.
Full Specs
| Fyne Audio Cubitt 5 Review | |
|---|---|
| Manufacturer | Fyne Audio |
| Size (Dimensions) | 165 x 215 x 260 MM |
| Weight | 4.2 KG |
| DAC | 24-bit/96kHz |
| Integrated Phono Stage | Yes |
| Release Date | 2026 |
| Audio Resolution | SBC, AAC, aptX HD |
| Driver (s) | 19mm titanium dome tweeter; 127mm IsoFlare mid/bass |
| Connectivity | Bluetooth 5.0 with SBC, AAC and aptX HD codec compatibility |
| Colours | Arctic White, Midnight Black, Olive Green, Pearl Titanium, Pebble Grey |
| Frequency Range | 43 34000 – Hz |
| Amplification | Class D |
| Speaker Type | Active Speaker |
| Stated Power | 240 W |
| Remote Control | Yes |
| Wall mountable | Yes |
| Bluetooth | Yes |
| Inputs | Analogue line-level; HDMI ARC; MM phono; optical |
| UK RRP | £549 |
| USA RRP | $749 |
| EU RRP | €649 |
| CA RRP | CA$899 |
| AUD RRP | AU$1499 |


















