Verdict
The EarFun Clip 2 makes notable sound improvements on the Clip to make them a solid and affordable clip-on earbud buy
-
Improved overall sound quality over the original Clip
-
Easy-to-use physical buttons
-
Compact charging case
-
Not quite best-sounding clip-on buds at this price
-
Fit when you get sweaty
-
Just two colour options
Key Features
Introduction
The Clip 2 sees EarFun update its open-ear earbuds that are low-cost alternatives to the likes of Shokz, Sony and Bose.
With the first Clip, EarFun ticked some key boxes. They were very comfortable to wear, offered support to tweak audio from a companion app and also delivered good battery life. What it lacked however was the sort of sound quality that signalled they were a good-value buy.
This is something EarFun clearly wants to address with the Clip 2. The competition for buds that cling to your ears at this price point is hotting up. Does the EarFun Clip 2 do enough to stand out?
Price
The EarFun Clip 2 was officially announced in January 2026 before going on sale in April 2026. They’re priced at £69.99, making them cheaper at launch than the first Clip (£79.99). The original Clip is still available for £59.99.
In the clip-on earbud realm, that makes the Clip 2 considerably cheaper than the Shokz OpenDots 2 (£179), Bose Ultra Open Earbuds (£250), the Soundcore AeroClip (£129) and the Skullcandy Push 720 Open (£99.99).
They’re also slightly cheaper than the Baseus Bowie MC2 (£79.99), which are the best-performing buds I’ve tested at around this price point.
Design
- Available in two colours
- Includes easy-to-reach physical buttons
- Charging case with wireless charging
EarFun got plenty right with the design of the first Clip, so it’s no surprise to see it’s held off making any drastic changes. These are buds still made from a combination of titanium and silicone. They’re light and well-fitting – so comfortable that sometimes I forget they’re still on.
They come in either black or white colours, which is one less colour option than the Clip. Some more colourful shades might have been nice, but if you’re happy with a pretty standard clip-on look, that’s what you get.
They weigh roughly the same as the original and are technically a little bigger to wear, though you’re unlikely to notice that. There are lighter and smaller clip-on buds out there, but I think they do a solid job of not dominating when they’re on your ears.
I did take issue with the Clip’s controls, which remain the physical kind for the Clip 2. These are placed on the top of the buds. It does seem like EarFun has refined the button design as they are a little more reliable to interact with. That’s even during some steadier-paced exercise or walking at a more breezy pace.

Using them for some more energetic exercise time is the only scenario where I’ve experienced some slight issues with the fit. The added sweat can cause the Clip 2 to slide around a little on the ear. Overall, the fit is good. The IP55 dust and water resistance rated design does mean you’ve got some good protection when things do get sweaty. Though this only applies to the buds and not the charging case.
The case is a very small and pocketable one, which includes a dedicated button to indicate pairing and battery status. That sits alongside the USB-C charging port when you need to power it up with the added bonus of Qi-certified wireless charging also on offer.
Features
- Four microphones for handling calls
- EQ presets and modes in EarFun app
With four microphones included to help block out background noise, call quality is perfectly fine to make the Clip 2 worthy of intercepting a call from your phone.
When handling calls indoors, with not a lot of external sound to contend with, there’s good volume and a good level of call clarity. When you introduce more noise and the Clip 2 needs to tap into those algorithms to battle out unwanted noise, you exchange it for a call quality that’s not as clear sounding.

EQ presets aside, the EarFun app does serve up a surprising array of additional modes. That includes modes that better emphasise sound effects when playing games. There’s a useful AI translation mode that can be used in a face-to-face mode or in real-time.
You can do the latter for a limited period before you need to pay for continued access. You can pair two devices at the same time and the find my headphones mode does work with the individual earbuds.
The battery setup is the same as the original. There are 60mAh batteries in each bud and a 490mAh one in the charging case, providing anywhere from 6–11 hours listening time. The shorter battery life is attached to using them for high-resolution audio playback. Those numbers do mean a slight upping on the battery performance from the last Clip. That’s an extra hour with high-resolution audio playback disabled and an extra 30 minutes with it turned on.

The numbers seem to stack up, even with volume set high, which usually dents battery life on open-ear earbuds a lot faster. It comes in just short of those claimed numbers, but not by a concerning amount. EarFun also includes a low power mode you can enable from the app, which reduces volume to help boost battery performance.
Charging from flat takes an hour on average with the charging case maxing the total battery to 40 hours. As mentioned, there is support for wireless charging when you don’t want to hunt out a USB-C charging cable.
Sound Quality
- Air conduction-based, open-ear sound
Sound performance is really what let the original Clip down. Like a lot of open-ear earbuds, it made big promises and simply didn’t deliver on them. With the Clip 2, clear improvements have been made. Has it been enough to make them the best-sounding clip-on earbuds? Not quite. It’s the kind of improvement that certainly makes it more competitive at this price.

What’s driving sound is a 12mm, dual magnetic titanium composite driver. This is a setup designed to deliver the type of bassy profile not typically associated with an open-ear, air conduction-based design. It’s also a hardware and software setup that’s capable of handling high-resolution audio playback.
The sound in general just feels tighter in more places. As far as promising that big bass, it’s pretty punchy in open-ear terms. Treble performance takes a bit of a backseat and you’ll want to enlist the EQ presets and custom EQ settings available in the well-stocked EarFun smartphone app to improve things.
If you’re searching for supremely smooth, detailed mids, you’re going to have to spend more on clip-on buds from Shokz, Bose and Anker to get that. It’s a satisfactory performance on that front to contribute to an overall likeable sound.

What’s crucial here as always is being able to maintain the pretty bright, reasonably balanced sound when you’re battling more sounds in an environment like traffic, wind or lots of voices. I’d say they do a respectable job of retaining that profile.
If you’re looking at around this price, the Baseus Bowie MC2 offers something a little more polished and well-rounded in comparison. I was definitely more than happy with what the Clip 2 offers across the board. Especially if you’re willing to play around with the additional sound modes on offer.
Should you buy it?
You want affordable, good-sounding clip-on earbuds
For the price, the EarFun Clip 2 gets the key things right to make them a good buy.
You want the best-sounding clip-on open-ear earbuds at this price
While sound performance has been upped, it doesn’t better the closest competition.
Final Thoughts
The EarFun Clip 2 offers better sound than the first Clip, but you could spend a bit more money on the Baseus Bowie MC2 and get more accomplished open-ear sound from a similarly comfortable and lightweight set of clip-on earbuds.
How We Test
We test every pair of headphones we review thoroughly over an extended period of time. We use industry-standard tests to compare features properly.
We’ll always tell you what we find. We never, ever, accept money to review a product.
Find out more about how we test in our ethics policy.
- Tested for several days
- Tested with real world use
Full Specs
| EarFun Clip 2 Review | |
|---|---|
| Manufacturer | Earfun |
| IP rating | IP55 |
| Battery Hours | 40 |
| Wireless charging | Yes |
| Fast Charging | Yes |
| Weight | 49.6 G |
| Release Date | 2026 |
| Audio Resolution | SBC, LDAC |
| Driver (s) | 12mm dual-magnetic driver |
| Connectivity | Bluetooth 6 |
| Colours | Black, White |
| Frequency Range | – Hz |
| Headphone Type | On-ear (Open) |
| UK RRP | £69.99 |
| USA RRP | TBC |


















